 |
 |
 |
|
 |
|
|
|
|
|
| |
The Track One meets the highest demands in sound quality and reliability and covers an unlimited application range from studio over live to post production applications. Features
Two separate precision pre-amplifiers, optimized for microphones (with 48 V phantom power) and instruments, ensure the lowest noise performance combined with an open, neutral sound while an LF cut filter is available to both inputs. The De-Esser is one of the most effective designs available, unobtrusively and effectively removing unwanted sibilant S-sounds via a single control. Auto-threshold control circuitry ensures consistent processing even if the vocal level or the distance to the microphone varies leaving the operator to decide only how much sibilance to remove. The compressor/limiter section displays excellent noise and distortion values and is operated via a single control. Its strength lies in its unobtrusive, musical method of operation where its parameters respond to the characteristics of the incoming signal. The EQ section has been specifically designed to process vocals and acoustic or electronic instruments and the specifications are as follows:
Microphone Input Frequency response: 10 Hz-200 kHz (200 kHz = -3 dB) Common mode rejection: 1 kHz: -80 dB / 10 kHz: -68 dB (at -20 dBu) THD & N amplification A-weighted 20 dB -97,5dBu 40 dB -91,0dBu 65 dB -69,6 dBu Dynamic response: 115 dB Instrument Input Frequency response: 10 Hz-180 kHz (180 kHz = -3 dB) THD & N amplification A-weighted 7 dB -98,4 dBu 20 dB -95,8 dBu 42 dB -77,2 dBu Input impedance Line: 12 kOhm / Instr.: 1 MOhm Max. input level Line: +25 dBu / Instr.: +13 dBu Dynamic response: 115 dB Outputs Max. output level XLR/jack: +20 dBu Output impedance: 50 Ohm Power Supply Toroidal transformer: 15 VA Fuses: 630 mA (115 V/60 Hz) 315 mA (230 V/50 Hz) Dimensions Stand.-EIA-19 inch/1U housing: 482 x 44 x 210 mm Weight: 3.1 kg The output amplification stage is adjustable over the range -20dB to +6 dB for optimal drive of subsequent units and the output is via balanced XLR and jack plugs that can be used in parallel if necessary. An A/D converter and a Lundahl input transformer can be provided as options. |
|
|
|
 |
|
 |
|
|
|
|
all content copyright © 2010 audiolot and/or their respective owners, all rights reserved. any reproduction, or use of any portion, of this website is strictly prohibited without the expressed written permission of a duly authorized person. these statements are including but not limited to any audio, video, images, code, etc. that may exist on the audiolot.com website or any of its sub domains |
|
