Pro Audio and Recording Studios Sales


Your Price:
List Price:
Please select your product:

The SPL Transient Designer 2 is a revolutionary concept in dynamic processing using differential envelope technology which allows you to adjust the sustain and attack of transients in audio material.

The SPL Transient Designer provides a revolutionary concept for dynamic processing rendering controls such as Threshold, Ratio and Gain superfluous. The Transient Designer's automation is highly developed, so that while the processing going on inside the box may be very complex, the user has to deal with just a few intuitive controls.

Differential Envelope Technology

SPL's Differential Envelope Technology is the first analog solution for level-independent shaping of envelopes allowing transients to be accelerated or slowed down and sustain prolonged or shortened. The degree of dynamic processing required to do this couldn't be duplicated even using a chain of several conventional compressors, yet only two controls per channel are required to allow the user to completely reshape the attack and sustain characteristics of a sound. Attack can be amplified or attenuated by up to 15dB while Sustain can be amplified or attenuated by up to 24dB, enabling weak drum sounds to be made much more percussive and powerful, or for over-percussive transients to be softened. All necessary time constants (Attack, Decay and Release) are automated and optimised adaptively in a musical manner according to the characteristics of the input signal. This results in natural sounding signal processing and fast operation.

How does the Transient Designer work?

The Transient Designer uses envelope followers to track the curve of the natural signal so that optimum results are guaranteed regardless of the input signal's dynamics (for more information refer to Tech Talk). Because of the level-independent processing inherent in Differential Envelope Technology (DET), manual threshold adjustments are not required. In order to maintain the cleanest possible signal path, the Transient Designer uses the excellently specified THAT 2181-VCAs, which are especially natural sounding, transparent and create minimal distortion. High amplitudes are processed without damping of high frequencies or reducing bass.

Sound benefits

  • The attack of a bass drum can be emphasised with a single control to increase punch & penetration
  • Sustain of snares or toms can be shortened very musically for more transparency
  • Beats any gate for drums - must-have for live engineers!
  • Acoustic or electronic instruments get "in the face" sounds or can be smoothened with lower attacks
  • De-verb capability! Less Sustain shortens reverb flags of any sound (more elegant than gates do)
  • New panorama effects based on different dynamic effects per channel - great for loops

Other features and connectivity

For stereo operation the Link function connects channel pairs (1 and 2). Linked channels are controlled by the same side-chain voltage so as to maintain a coherent and stable stereo image. When operating in Link-mode, the control elements of the first channel, including the Active switch, control the second channel, too.

Each channel is equipped with a relay hard bypass circuit to ensure a minimum signal path when the process is bypassed and to provide power fail safety. The Signal-LEDs allow to quickly monitor the signal flow. The Transient Designer is fitted with 1/4"-connectors for unbalanced operation.


  • Input & Output
    • Input impedance:
      100 kOhms
    • Output impedance:
      < 600 Ohms
    • Max. input level:
    • Max. output level:
    • Minimum load ohms:
      600 Ohms
    • Relay Hard Bypass
    • Power Fail Safety
  • Measurements
    • Frequency response:
      20 Hz - 100 kHz - (100 kHz = -3 dB)
    • THD & N:
      0,004% @1kHz
    • S/N CCIR 468-3:
    • S/N A-weighted:
  • Power Supply
    • Torroidal transformer:
    • Fuse:
      200 mA
    • Ground-Lift switch
    • Voltage selector
  • Dimensions
    • Housing:
      Standard EIA 19"/1U, 482 x 44,45 x 220mm
    • Weight:
      2,25 kg

Note: 0dBu = 0.775V
Specifications subject to change without notice

Have Questions?

Click here for Live Support
Free Shipping
AudioLot's Low Price Guarantee
Related Items