|
|  |
Inspired by classic German Bottle Microphones
General Characteristics
The VTB uses innovative Peluso circuitry giving it an extremely low noise floor with a classic tube sound. It has a strong and clean low end, smooth and flat mid-range, and lots of high end air. The Peluso VTB has 9 polar patterns, controlled from the power supply. It also has an additional switch to disable the pattern control system, allowing it to run in single diaphragm cardioid mode, giving it extremely pure cardioid characteristics.
This microphone comes as a complete system, with the microphone in custom wood box, flight case, power supply, 7 conductor cable and includes the shock mount. The VTB, like all other Peluso microphones, is hand built in the USA.
Microphone Cables
The microphone cable can have a profound effect on the sound of any microphone. Even the finest microphones will sound poor if the interconnect cable allows noise to enter, or causes distortion and degradation of sound. Use only the best microphone cable to obtain the optimum performance from your microphone.
Care & Protection
Dust and foreign material can degrade the performance of a microphone over time, so always store the unit in its case. Remove fingerprints from the exterior with a camp soft cloth.
Technical Data
Type: Condenser Pressure Gradient w/ 34 mm edge-terminated capsule
Frequency Range: 25 Hz/24 Khz
Polar Pattern: 9 - Switchable from omni- to bi-directional w/ pattern control disable
Sensitivity: > 11 mv/pa
Impedance: 200 ohms
Equivalent Noise: 15 db (A-weighted)
Power Requirements: Dedicated Power Supply
Size: 50mm x 225 mm
Weight: 620g
Warranty
Peluso microphones are guaranteed against defects in material and workmanship for 3 years from the date of the initial purchase.
|
|
|
